On-line monitoring method for long distance power cable insulation PROJECT TITLE :On-line monitoring method for long distance power cable insulationABSTRACT:There are cross-linked metal sheath and voltage drop in the long distance power cable that create distinction between the short and the long distance power cables on on-line insulation monitoring technology. In order to solve the problem, two terminal synchronous tanδ measurement as a replacement technique of on-line insulation monitoring had been put forward in the paper. The working principle and theoretical basis of calculation were given. The feasibility of the strategy was demonstrated when there was synchronization error in the system. The Matlab software was used to simulate the circuit of three-part cable and to calculate tanδ of cable insulation. The results show that the load current will not influence on tanδ measurement if opt for the average of vector sum of voltage at the two ends of the cable. And therefore the harmonic and frequency fluctuation had very little influence on the methods. The methods were proved to be validity and feasibility within the paper. It can be obtained that the methods were suitable for all kinds of cable insulation monitoring whether the metal sheath of 3-part cable was cross-linked or not. Did you like this research project? To get this research project Guidelines, Training and Code... Click Here facebook twitter google+ linkedin stumble pinterest Gyro-TWT Using a Metal PBG Waveguide as Its RF Circuit—Part II: PIC Simulation and Parametric Analysis A time synchronization technique for coap-based home automation systems