A Grid-Level High-Power BTB (Back-To-Back) System Using Modular Multilevel Cascade Converters Without Common DC-Link Capacitor PROJECT TITLE: A Grid-Level High-Power BTB (Back-To-Back) System Using Modular Multilevel Cascade Converters Without Common DC-Link Capacitor (2014) ABSTRACT: This paper provides an intensive discussion on analysis, simulation, and experiment of a back-to-back (BTB) system unifying two modular multilevel cascade converters based on double-star chopper cells (MMCCs-DSCCs). Each of the two DSCCs connected back-to-back consists of multiple cascaded chopper cells and a center-tapped inductor per leg. Low voltage steps bring significant reductions in harmonic voltage and current to the BTB system. Neither dc-link capacitor nor voltage sensor is required for regulating the dc-link voltage and controlling the dc-link current. A three-phase 200-V, 10-kW, 50-Hz downscaled BTB system with phase-shifted PWM is designed, constructed, and tested to verify its operating principles and performance. Analytical, simulated, and experimental results agree well with each other in steady and transient states. Experimental waveforms confirm the effectiveness of a self-starting/restarting procedure. Did you like this research project? To get this research project Guidelines, Training and Code... Click Here facebook twitter google+ linkedin stumble pinterest A High-Frequency Link Multilevel Cascaded Medium-Voltage Converter for Direct Grid Integration of Renewable Energy Systems A Cascaded Multilevel Inverter Based on Switched-Capacitor for High-Frequency AC Power Distribution System