Optimal location and control of shunt FACTS for transmission of renewable energy in large power systems ABSTRACT: Shunt FACTS devices provide the possibility to control voltages and therefore to improve the security of the system. In order to use this possibility, the optimal location and the set values of the FACTS controllers have to be selected correctly. The singular analyses of the Power System Jacobian matrix are applied to identify theoptimal location of shunt FACTS devices in large Power Systems. Furthermore the application of Optimal Power Flow control is a possible method for choosing set values. In this paper a sensitivity index for the detection ofsensor nodes is defined. Sensitivity analysis is used to determine the area on which the FACTS device has significant influence. And then only this limited area is included in the Optimal Power Flow control, because it is very difficult to include the entire system into the optimization process. Simulations are performed on an IEEE 57-bus system. Furthermore the objective function of Optimal Power Flow control is analyzed. This function consists of three components. A certain type of FACTS is not able to influence all these components. In this paper it is evaluated for which component the shunt FACTS devices are mainly responsible. Did you like this research project? To get this research project Guidelines, Training and Code... Click Here facebook twitter google+ linkedin stumble pinterest Wind Farm to Weak-Grid Connection using UPQC custom power device Power-Management Strategies for a Grid-Connected PV-FC Hybrid System