Analysis and Design of Tunable Amplifiers for Implantable Neural Recording Applications ABSTRACT:In this paper, an in-depth design methodology for fully-integrated tunable low-noise amplifiers for neural recording applications is presented. In this methodology, a modified system design is proposed to optimize the area/noise/linearity performance. A novel linear pseudo-resistor with a wide range of tunability is also proposed. As a case study, a low-noise tunable and reconfigurable amplifier for neural recording applications is designed and simulated in a 0.18 $mu{rm m}$ complementary metal–oxide–semiconductor process in all process corners. Simulated characteristics of the amplifier include tunable gain of 54 dB, tunable high-cutoff frequency of 10 kHz, programmable low-cutoff frequency ranging from 4 to 300 Hz, and power consumption of 20.8 $mu{rm W}$ at 1.8 V. According to postlayout simulations, integrated input-referred noise of the amplifier is 2.6 $mu{rm V}_{rm rms}$ and 2.38 $mu{rm V}_{rm rms}$ over the 0.5 Hz–50 kHz frequency range for low-cutoff frequency of 4 and 300 Hz, respectively. The amplifier also provides output voltage swing of 1 ${rm V}_{rm P-P}$ with total harmonic distortion of -46.24 dB at 300 Hz, and -45.97 dB at 10 kHz. Did you like this research project? To get this research project Guidelines, Training and Code... Click Here facebook twitter google+ linkedin stumble pinterest An Implantable Seizure-Onset Detector Based on a Dual-Path Single-Window Count-Based Technique for Closed-Loop Applications Feature Selection for Automatic Burst Detection in Neonatal Electroencephalogram