Modeling and Applications of Metamaterial Transmission Lines Loaded With Pairs of Coupled Complementary Split-Ring Resonators (CSRRs)

PROJECT TITLE :

Modeling and Applications of Metamaterial Transmission Lines Loaded With Pairs of Coupled Complementary Split-Ring Resonators (CSRRs)

ABSTRACT:

This letter is concentrated on the modeling, analysis, and applications of microstrip lines loaded with pairs of electrically coupled complementary split-ring resonators (CSRRs). Usually, these epsilon-negative (ENG) metamaterial transmission lines are implemented by loading the road with a single CSRR (etched beneath the conductor strip) in the unit cell. This provides a stopband in the vicinity of the CSRR resonance. However, by loading the line with a pair of CSRRs per unit cell, it's attainable to either implement a twin-band ENG transmission line (helpful, as an example, as a twin-band notch filter), provided the CSRRs are tuned at totally different frequencies, or to style microwave sensors and comparators primarily based on symmetry disruption (in this case by using identical CSRRs and by truncating symmetry by completely different means, e.g., uneven dielectric loading). The design of these CSRR-based structures requires an accurate circuit model able to describe the line, the resonators, and the different coupling mechanisms (i.e., line-to-resonator and inter-resonator coupling). Therefore, a lumped element equivalent circuit is proposed and analyzed well. The model is validated by comparison to electromagnetic simulations and measurements. A proof-of-concept of a differential sensor for dielectric characterization is proposed. Finally, the similarities of these structures with coplanar waveguide transmission lines loaded with pairs of SRRs are noted.

Did you like this research project?

To get this research project Guidelines, Training and Code... Click Here