Bandstop-to-Bandpass Microwave Photonic Filter Using a Phase-Shifted Fiber Bragg Grating PROJECT TITLE :Bandstop-to-Bandpass Microwave Photonic Filter Using a Phase-Shifted Fiber Bragg GratingABSTRACT:A bandstop-to-bandpass microwave photonic filter (MPF) employing a phase-shifted fiber Bragg grating (PS-FBG) and a dual-drive Mach–Zehnder modulator (DD-MZM) is proposed and experimentally demonstrated. The PS-FBG has an ultra-narrow notch within the reflection band. The DD-MZM is utilized to generate a phase-modulated or a quasi-single-sideband (QSSB) optical signal by controlling the bias voltage. By applying the section-modulated or QSSB signal to the PS-FBG to suppress one sideband, a bandpass or a bandstop MPF is implemented. The MPF will be continuously tuned from bandstop to bandpass or vice versa by controlling the bias voltage applied to the DD-MZM. The frequency tuning will be merely done by tuning the wavelength of the optical carrier. The proposed MPF is experimentally evaluated. Continuous tuning from a bandstop to bandpass filter with a bandstop rejection as high as 60 dB and frequency tuning with a frequency tunable vary as giant as ten GHz are demonstrated. Did you like this research project? To get this research project Guidelines, Training and Code... Click Here facebook twitter google+ linkedin stumble pinterest Lens-Less Coupling of Cavity-Resonator-Integrated Guided-Mode Resonance Filter Implicit Lyapunov-Krasovski Functionals for Stability Analysis and Control Design of Time-Delay Systems