Bended Differential Transmission Line Using Compensation Inductance for Common-Mode Noise Suppression PROJECT TITLE :Bended Differential Transmission Line Using Compensation Inductance for Common-Mode Noise SuppressionABSTRACT: In this paper, a bended differential transmission line employing a compensation inductance is proposed to efficiently suppress the common-mode noise. The bended differential transmission line using the compensation inductance will then be implemented by the bended differential transmission line using the short-circuited coupled line. It has been shown that the bended differential transmission line using the short-circuited coupled line will greatly cut back the mode conversion from $-5.47$ to $-rm 14.75~rm dB$, and also the time-domain-through common-mode noise from zero.068 to zero.02 V as compared with the bended differential transmission line using the correct-angle bend. So as to verify the simulation results, measurement is finished in the frequency and time domains where the measurement results are in good agreement with the simulation results. Did you like this research project? To get this research project Guidelines, Training and Code... Click Here facebook twitter google+ linkedin stumble pinterest Fabrication of Electronic Packaging Grade Cu–W Materials by High-Temperature and High-Velocity Compaction Study on the Near Field Characteristic of Antenna in Package
