PROJECT TITLE :

Measurements and Modeling of Effects of Out-of-Plane Reverberation on the Power Delay Profile for Underwater Acoustic Channels

ABSTRACT:

Long reverberation tails are usually observed in shallow-water acoustic channel impulse responses (CIRs). Examples from 3 considerably different environments along the Norwegian coast are presented. It's shown that 2-D propagation modeling fails to reproduce the long tails. Nevertheless, inclusion of the impulse response tails is critical in affiliation with model-based mostly simulators of Communication performance, to avoid too optimistic estimates of bit error rates, etc. This is often demonstrated by simulation examples for one in all the environments, comparing results for truncated and complete impulse responses. High wind speeds and Doppler spread signals indicate that surface reverberation must be taken into consideration for modeling the tail energy. In bistatic situations such as the ones considered here, backscattering computations in an exceedingly single vertical two-D plane don't seem to be sufficient. A 3-D ray-based mostly model, Rev3D, is used to incorporate effects of out-of-plane scattering from the sea bottom plus the ocean surface. The scattering-strength functions include azimuthal variation, with considerably enhanced scattering close to the forward direction. Rev3D modeling supports the hypothesis that out-of-plane scattering and reverberation are main mechanisms behind the observed continuous, exponentially decaying impulse responses. Modeling incorporates offered environmental information concerning sound-speed profiles, bottom topography and type, surface wave spectra, etc. Sensible agreement of measured and modeled time series is obtained for 2 of the locations. For the remaining location, modeling correctly recovers a considerably lower decay rate of the reverberation tail compared to the opposite locations, however the modeled decay rate is somewhat too massive.


Did you like this research project?

To get this research project Guidelines, Training and Code... Click Here


PROJECT TITLE : Multi-tier Workload Consolidations in the Cloud Profiling, Modeling and Optimization ABSTRACT: It is becoming increasingly important to cut down on tail latency in order to improve the experience that users have
PROJECT TITLE : Accurate Angular Inference for 802.11ad Devices Using Beam-Specific Measurements ABSTRACT: The 60 GHz channels are characterized by having only a few dominant paths as a result of their sparsity. We are able
PROJECT TITLE :Optimal Sequential Fusion Estimation With Stochastic Parameter Perturbations, Fading Measurements, and Correlated Noises - 2018ABSTRACT:This Project focuses on the linear optimal recursive sequential fusion filter
PROJECT TITLE :Low-Rank Matrix Recovery From Noisy, Quantized, and Erroneous Measurements - 2018ABSTRACT:This Project proposes a communication-reduced, cyber-resilient, and data-preserved data collection framework. Random noise
PROJECT TITLE :Accurate Recovery of Internet Traffic Data Under Variable Rate Measurements - 2018ABSTRACT:The inference of the network traffic matrix from partial measurement information becomes increasingly vital for various

Ready to Complete Your Academic MTech Project Work In Affordable Price ?

Project Enquiry