Design of injection-locked oscillator circuits using an HBT X-parameters™-based model PROJECT TITLE :Design of injection-locked oscillator circuits using an HBT X-parameters™-based modelABSTRACT:A load independent X-parameters-based heterojunction bipolar transistor (HBT) model has been used for the first time in the planning and behaviour prediction of injection-locked oscillator circuits. This model has been extracted from load-pull measurements with a massive-signal network analyser and, so as to get a high oscillator RF power, targeting a load impedance close to the optimum one for HBT most output power. A methodology is given to obtain sturdy injection-locked oscillator circuits with a high-synchronisation bandwidth. Many injection-locked oscillator prototypes have been designed and fabricated, and their measurements compared with the simulations obtained using the X-parameters model. Satisfactory results were obtained when the prototypes were operated as free-running and synchronised oscillators. Did you like this research project? To get this research project Guidelines, Training and Code... Click Here facebook twitter google+ linkedin stumble pinterest Stacked microstrip antenna fed by an L-probe for quadruple band operation Grid-Connected Photovoltaic Plants: An Alternative Energy Source, Replacing Conventional Sources