Remote power ON/OFF control and current measurement for home electric outlets based on a low power embedded boards and ZIGBEE communication ABSTRACT: In this paper we have designed a remote power on/off control and a current measurement for electric outlets, based on both an embedded board and on ZigBee Communication. This design consists of two parts: the ZigBeecontrol module and the server module. The ZigBee control module contains several controllable outlets, a currentmeasurement circuit, the ZigBee receiving and transmission circuit and a micro control unit. The measurementcircuit senses the current and sends back a signal to the server module through the ZigBee. The measurementdata of the current and voltage detection can be stored in the embedded board, and they can be designed to become aware of any overload and to send out a message to the circuit breaker for safety. We use Visual Basic as the interface software for the design of the graphic user interface to provide a user-friendly operation of a typical homepsilas electric outlets. Did you like this research project? To get this research project Guidelines, Training and Code... Click Here facebook twitter google+ linkedin stumble pinterest Design of monitoring system for coal mine safety based on wireless sensor network Automated vehicles for physically and visually challenged