My Account | Careers | Downloads | Blog

PROJECT TITLE :

Abdominal Palpation Haptic Device for Colonoscopy Simulation Using Pneumatic Control

ABSTRACT :

During this paper, we describe the event of a haptic device to be used in a simulator aiming to coach the skills of gastroenterology assistants in abdominal palpation throughout colonoscopy, plus to train team interaction skills for the colonoscopy team. To understand the haptic feedback forces to be simulated by the haptic device, we tend to conducted an experiment with 5 participants of varying BMI. The applied forces and displacements were measured and hysteresis modeling was used to characterize the experimental data. These models were used to see the haptic feedback forces required to simulate a BMI case in response to the $64000-time user interactions. The pneumatic haptic device consisted of a sphygmomanometer bladder because the haptic interface and a fuzzy controller to control the bladder pressure. The haptic device showed smart steady state and dynamic response was adequate for simulating haptic interactions. Tracking accuracy averaged ninety four.a pair of p.c at intervals three hundred ms of the reference input while the user was actively applying abdominal palpation and minor repositioning.


Did you like this research project?

To get this research project Guidelines, Training and Code... Click Here

PROJECT TITLE : Estimation, Control and Prediction of Voltage Level and Stability at Receiving Node ABSTRACT: Receiver voltage stability is addressed in this article. Voltage stability and level are intertwined concepts. Although
PROJECT TITLE :Modelling, simulation, and verification for detailed short-circuit analysis of a 1 × 25 kV railway traction systemABSTRACT:This study presents a modelling and simulation method for the analysis of short-circuits
PROJECT TITLE :Oil-Whirl Fault Modeling, Simulation, and Detection in Sleeve Bearings of Squirrel Cage Induction MotorsABSTRACT:Bearings are divided into two main classes: rolling bearings and sleeve bearings. The sleeve bearings
PROJECT TITLE :Design, Simulation, and Fabrication of 4H-SiC Power SBDs With SIPOS FP StructureABSTRACT:We tend to introduce a field plate (FP) termination structure utilizing semi-insulating polycrystalline silicon (SIPOS) as
PROJECT TITLE :A Robotic Leg Prosthesis: Design, Control, and ImplementationABSTRACT:This text describes the look and control of a powered knee and ankle prosthesis for transfemoral amputees. Following an outline of the design

Ready to Complete Your Academic MTech Project Work In Affordable Price ?

Project Enquiry