ABSTRACT:

This paper presents a design method of force rebalance control for the sense mode of a micromachined vibratory gyroscope with multiobjective. The control strategy is mainly based on constraining sensitivity margin specifications via numerical optimization approach, which embeds the sense mode in a closed-loop system to possess more robust performance. This paper also provides a quantitative methodology of configuring the system parameters to realize the functional electrostatic force feedback control for the microgyroscope in the case of nonideal coupling and external angular disturbance. Theoretical results predicted by the control loop are shown to be in close agreement with the experimental results using a practical microgyroscope, which indicated a satisfactory performance of the proposed control algorithm. The maximums of the sensitivity function and complementary sensitivity function are measured to be 4.5 and 1 dB, resulting in GM ≥ 7.84 dB and PM ≥ 35°. The gyroscope achieves a scale factor of 7.1 mV/deg/s with nonlinearity of 0.2% which is improved by one order of magnitude compared with that of the open loop. The bandwidth is extended to about 98 Hz from 30 Hz in the open loop. The quadrature error and temperature stability of the scale factor are reduced from - 10.33 to -59.22 dB and from 4858 to 646 ppm/°C with the force rebalance control, respectively.


Did you like this research project?

To get this research project Guidelines, Training and Code... Click Here


PROJECT TITLE :Impaired Inhibitory Force Feedback in Fixed DystoniaABSTRACT:Advanced regional pain syndrome (CRPS) could be a multifactorial disorder related to an aberrant host response to tissue injury. About 25percent of CRPS
PROJECT TITLE :An Impedance-Based Force Control Scheme to a Plate-to-Plate NanoimprinterABSTRACT:Nanoimprint lithography (NIL) is a novel technique that utilizes direct deformation of the resist to fabricate micro/nanometer scale
PROJECT TITLE :Real-Time Reconstruction of Multimode Tip Motion of Microcantilevers in Dynamic Atomic Force MicroscopyABSTRACT:A modal projection filtering method is proposed for the dynamic atomic force microscopy (AFM) to accurately
PROJECT TITLE :Lorentz Force Evaluation With Differential EvolutionABSTRACT:In the framework of nondestructive testing and evaluation, Lorentz force evaluation (LFE) is a methodology for reconstructing defects in electrically
PROJECT TITLE :Double-Sided Iron-Core PMLSM Mover Teeth Arrangement Design for Reduction of Detent Force and Speed RippleABSTRACT:This paper analytically and experimentally shows effectiveness and simplicity of mover teeth arrangement

Ready to Complete Your Academic MTech Project Work In Affordable Price ?

Project Enquiry