Dual Use of Power Lines for Design-for-Testability—A CMOS Receiver Design - 2016


As the circuit complexity will increase, the amount of internal nodes will increase proportionally, and individual internal nodes are less accessible thanks to the restricted variety of obtainable I/O pins. To address the problem, we proposed power line Communications (PLCs) at the IC level, specifically the dual use of power pins and power distribution networks for application/ observation of take a look at information with delivery of power. A PLC receiver presented during this paper intends to demonstrate the proof of concept, specifically the transmission of data through power lines. The main design objective of the proposed PLC receiver is that the strong operation beneath variations and droops of the supply voltage instead of high information speed. The PLC receiver is intended and fabricated in CMOS zero.18-µm technology beneath a provide voltage of 1.8 V. The measurement results show that the receiver will tolerate a voltage drop of up to 0.423 V for a knowledge rate of 10 Mb/s. The facility dissipation of the receiver is 3.twenty six mW under 1.8 V supply, and the core area of the receiver is 74.9µm × 72.2 µm.

Did you like this research project?

To get this research project Guidelines, Training and Code... Click Here

PROJECT TITLE : ICIC: A Dual Mode Intra-Cluster and Inter-Cluster Energy Minimization Approach for Multihop WSN ABSTRACT: In the process of designing a wireless sensor network, one of the most important concerns is reducing
PROJECT TITLE : A derivative PBFT blockchain consensus algorithm with dual primary nodes based on separation of powers-DPNPBFT ABSTRACT: The Practical Byzantine Fault Tolerant (PBFT) consensus algorithm has many benefits, which
PROJECT TITLE : Optimal Phase Shift Control to Minimize Reactive Power for a Dual Active Bridge DC-DC Converter ABSTRACT: Under non-unity voltage gain conditions, modulating the phase shift ratios in a dual active bridge (DAB)
PROJECT TITLE : Modeling Dual Active Bridge Converters in DC Distribution Systems ABSTRACT: Dual active bridge (DAB) converter systems are proposed for improved modelling. Systematic methods for building models of multiconverter
PROJECT TITLE : Comprehensive Diagnosis and Tolerance Strategies for Electrical Faults and Sensor Faults in Dual Three-Phase PMSM Drives ABSTRACT: To increase the dependability of dual three-phase permanent-magnet synchronous

Ready to Complete Your Academic MTech Project Work In Affordable Price ?

Project Enquiry