Miniaturized Circularly Polarized Loop Antenna for Biomedical Applications


A novel circularly polarized antenna is proposed at 902–928 MHz Industrial, Scientific, and Medical band for implantable applications. By properly positioning the feed and shorts, either right-hand circular polarization property or left-hand circular polarization property will be realized. Slow wave concept is used by loading patches to the radiated loop antenna to achieve miniaturization. Therefore, a compact size of 13 mm$,times,$ 13 mm$,times,$ 1.twenty seven mm is obtained. Compared to the unloaded loop antenna of the same size, the centre frequency shifts from 1.ninety three GHz to 882.five MHz, which suggests a miniaturization of fifty four.four%. The simulated results show that a wide bandwidth of eighteen.a pair ofpercent can be realized with $vert S_11vert$ below $-ten$ dB and axial ratio below three dB. The simulated realized gain is $-thirty two$ dBi at 915 MHz. The measurement is carried out in each skin-mimicking gel and pork, and a bandwidth of 27.8% and twenty nine.4% can be achieved with $vert S_11vert$ below $-ten$ dB, respectively. The measurement of $vert S_21vert$ reveals that circular polarization will be obtained for the proposed configuration.

Did you like this research project?

To get this research project Guidelines, Training and Code... Click Here

PROJECT TITLE :Experimental Verification of Below-Cutoff Propagation in Miniaturized Circular Waveguides Using Anisotropic ENNZ Metamaterial LinersABSTRACT:This paper presents experimental verification of below-cutoff transmission
PROJECT TITLE :A Miniaturized Uniplanar Metamaterial-Based EBG for Parallel-Plate Mode SuppressionABSTRACT:The suppression of parallel-plate modes is tough to manage over electrically short lengths. The employment of electromagnetic
PROJECT TITLE :On the Improvement of Angular Stability of the 2nd-Order Miniaturized FSS StructureABSTRACT:To enhance the angular stability of 2nd-order bandpass miniaturized frequency selective surface (MFSS), consisting of metal
PROJECT TITLE :SLA 3-D Printed Arrays of Miniaturized, Internally Fed, Polymer Electrospray EmittersABSTRACT:This paper reports the look, fabrication, and characterization of arrays of miniaturized, internally fed, polymer electrospray
PROJECT TITLE :A Novel Dual-Band, Dual-Polarized, Miniaturized and Low-Profile Base Station AntennaABSTRACT:During this paper, a novel twin-band, dual-polarized, miniaturized and low-profile base station antenna operating within

Ready to Complete Your Academic MTech Project Work In Affordable Price ?

Project Enquiry